Show newer

Here's a very stripped down version of ( firmware for @PINE64 ) running on the MCU!

The touch gestures are simulated by a APDS9960 motion sensor.

This is just a PoC but hey! It works!

We've just released 1.2.0!

This new version brings a new Metronome app, many improvements and bugfixes.

This version will hopefully be flashed on the new @PINE64 that should be available !

github.com/JF002/InfiniTime/re

infinitime.io

These last few weeks, I analyzed the memory (RAM & FLASH) usage of , the firmware running on the @PINE64 .

I spent so much time doing that I want to share the result with everyone :)

github.com/JF002/InfiniTime/bl

Some fun with @PINE64 MCU, SPI display (ST7789) and I²C gesture sensor (APDS9960) : Gesture detection 👋

Here's 1.1.0, a new release of the firmware for @PINE64 !
New Steps and Timer apps, many improvements and bugfixes, have fun!

Release note and download : github.com/JF002/InfiniTime/re

Testing the gateway from @PINE64 (based on technology) on and using my good old Pycom board!

All of this using hardware and software!

Meet my absolutely NOT optimized (no IRQ, no DMA) SPI driver for the mcu. It already runs much faster than my optimized version for the NRF52 :-P

I couldn't find a toolchain for the @PINE64 so I built my own one!

For anyone interested, here's how I did it : github.com/JF002/bl602_cmake_b

I can now build, flash and debug my code running on the from my PBP!

We did it! We've just released 1.0!

Please read the full announcement on the blog of @PINE64 (pine64.org/2021/04/22/its-time) and have fun with your !

Release note : pine64.org/2021/04/22/its-time

What's new in this version : step counter, wake up on wrist rotation, UI redesign, more user settings, user settings stored in flash memory, and many more features and less bugs!

Here's another new release of , the firmware for @PINE64 .

You can now enjoy a new analog watchface along with a slightly improved digital one, and a new stopwatch app!

Release note and binaries : github.com/JF002/InfiniTime/re

I'm happy to announce 2 new releases for @PINE64 : A new bootloader and a recovery firmware based on 0.14.1!

Please read carefully the instructions before upgrading the bootloader of your sealed units!

github.com/JF002/pinetime-mcub

github.com/JF002/InfiniTime/re

New @PINE64 development setup for : PSU, DIY current measurement based on INA219 and M5Fire) and STLinkV2 for debugging!

InfiniTime 0.14.0 "Green Avocado" for @PINE64 is out!

This release updates the version of LVGL and brings many visual improvements.

Release note : github.com/JF002/Pinetime/rele

Show older
Mastodon::codingfield

The social network of the future: No ads, no corporate surveillance, ethical design, and decentralization! Own your data with Mastodon!